Issue Installing prima 4/8 Driver

New Windows 10 installations may have Core Integrity enabled and this may cause the Magicard Prima driver not to install.

Try disabling the "Memory Integrity" setting within Windows.

It can be found under "Security" -> "Core Isolation" -> 

Can you try disabling the "Memory Integrity" setting within Windows.

It can be found under "Security" -> "Core Isolation" -> 

You'll need to change the setting and then reboot.

Then, run the installation process.

In some instances, it can be that the driver loaded "CX7000" under "Universal Serial Bus Controllers" within "Device Manager.

This causes the Port Monitor install process to become unresponsive.

The workaround is to uninstall the CX7000 (right click -> uninstall via Device Manager).

Then, ensure the Core Isolation is disabled and run through the Driver install again.