While we're on the subject, I have another one for the HID Omnikey 5122 (below) ?
Testing the HID Omnikey 5122 dual (contact / contactless) encoder;
Work backwards from the printer.
Step 1;
Does the PC see the encoder(s)? (Yes / No)
From Control Panel -> Device Manager expand the Smart card readers entry;
Assuming Yes, and it’s an HID Omnikey 51xx dual encoder that is fitted;
Step 2;
Download and install HID’s Omnikey Workbench.
The latest version is V2.2 and can be downloaded from here;
https://www.hidglobal.com/drivers/37339
Does that see the encoder(s)?
Assuming the encoders are listed in the Omnikey Workbench;
Step 3;
Select the contactless encoder (for contact chip encoding, choose the top encoder, without CL);
Load the Mifare card into the contactless encoding position here;
Printer Properties -> Encoding;
Look on the HID Omnikey Workbench.
Does it see the card?
Is there an answer to reset (ATR)?
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article