How to set up the reverse of the card on your card design

To set up the reverse of the card on your Card Design do the following.

1.  Open up your design by clicking the Change design button.

2. Click the green edit design  button.

3. From the design view click the options button (white box with 3 lines)

                4. Then Click ‘Card Setup’

                5. Click the ‘2 sided Design’ box and click OK

You will now be able to select ‘Reverse’ in the bottom left of the card.

Finally Click the Save disk and then the small ‘X’ to close the card design when you have finished adding the required information to the reverse of the card