Evolis Quantum 2 - Magnetic Encoding Issues

Modified on Wed, 4 Jan, 2023 at 11:56 AM


If your Evolis Quantum 2 ID card printer is not encoding correctly you will need to calibrate the encoder sensors on your printer.

Please note, a YMCKO ribbon must be installed to run the calibration.

To Calibrate your Printer

  1. Go to your devices and printer folder.
  2. Right click on the Pebble 4 and choose hoose printing preferences.
  3. Click on the Tools tab, then click Dialog with Printer.
  4. Type the command Sa;c (must be exact). Click enter on your keyboard to send the command.


The printer will then check the color sensor. The answer should be OK.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article